Saturday, November 14, 2009

Infrared Photography and Panasonic Lumix Infrared IR Conversion DMC-LZ5

P1010931
Taken with the IR Converted Panasonic DMC-LZ5

Our eyes can only see a small slice of the energy radiated from the Sun. We call the energy that we can see "Light". If we look at a rainbow there are the 7 colors: red, orange, yellow, green, blue, indigo, and violet. However, there is energy that is high frequency than Violet called "Ultra Violet" (UV) and energy that is lower frequency than red called "Infra Red" (IR).

Thankfully, digital sensors are very sensitive to light in the near infrared spectrum, but the sensors are not sensitive to heat that is far beyond the visible red light (far infrared). Energy with a wavelength of about 10,000 nm is perceived by us as heat, and it takes a different kind of camera to see heat.

However, since digital sensors are so sensitive to IR, the manufacturers install IR cut filters directly on the sensor to prevent the IR from spoiling color photographs (it turns black clothes gray, etc). Because of this it is best to convert the camera by removing the IR cut filter, although you can still take IR pictures without doing this, the shutter speeds will be very long.

You might also be thinking UV, but light in the UV sepectrum is mostly filtered out by the superb modern coatings on the lenses (and the glass itself), but the sensors are sensitive to it. Some older lenses or specialized quartz lenses can focus UV effectively.

The camera sees IR as intensity, with no hue or saturation to it. A true IR picture will therefore be black and white. If an IR picture is B&W, what is the point of using IR instead of visible B&W? Because objects in the world do not reflect IR the same as they reflect visible light.

IR is reflected from foliage in pretty uniform intensity, so pretty much all foliage will appear gray or white on an IR image. Also, a clear blue sky reflects almost not IR energy and will appear nearly black. IR is an excellent way to separate foliage from man made objects, and more. For example, a statue in a flower garden stands out as black against white, a traditional B&W would be lower contrast here.


Dancing in the Trees
Non-converted IR camera with 720 nm filter, B&W (Fujifilm S1 Pro)


IMGP0618
Similar shot in visible light (Pentax K-2000)

Light has an associated wavelength to it. This wavelength determines if we can see the color of light or not. Infrared is everything above approximately 700 nm, and ultra violet is everything below approximately 400 nm. The smaller the wavelength the higher frequency, so 400 nm is a high frequency and 700 nm is a lower frequency.

Don't worry too much about these numbers, except when buying infrared filters. A 720 nm filter cuts off light below 720 nm, so only IR above 720 nm gets through (these filters look black if you look try to look through them). A 720 nm filter still lets some visible red through, but an 800 nm filter or above cuts off nearly all visible light and will offer a nearly black and white picture.

So how do you get started in IR? Well first, you need an IR filter. If you have an SLR you can just screw this filter into the lens and take a picture. The issue is you can't see to focus or compose, but the AF sensors in the camera should be capable of focusing IR light automatically. If you haven't modified the camera, the shutter speeds will be very long too, several seconds at ISO 100 in bright daylight.

If you aren't handy with tools you might buy a camera that has been converted to IR. This is a camera that has had the IR cut filter removed and replaced with an IR filter on the sensor (or left with no filter and the IR filter is placed on the lens.

What is involved in converting a camera to IR? If you are serious you can watch these 3 videos of me converting a Panasonic DMC-LZ5 to IR. The videos are a total of about 20 minutes (how long it took me to do the conversion).

Part 1:


Part 2:


Part 3:


So, if you want to get into IR photography, first you need a filter, then ideally you need a converted camera, and finally, you need to get out and take pictures! It is a blast.

Eric
http://www.flickr.com/photos/28177041@N03/tags/infrared/

Some other IR sources:
http://www.jr-worldwi.de/photo/index.html (a lot more detailed than I am here).
http://www.lifepixel.com/IR.htm (commercial site for conversions)
http://www.maxmax.com/ (commercial site for conversions)

2 comments:

  1. I just came across your blog and wanted to drop you a note telling you how impressed I was with the information you have posted here.
    Keep up the great work, you are providing a great resource on the Internet here!

    r4ds

    ReplyDelete
  2. Thanks! I am glad it is useful to someone :)

    ReplyDelete