Tuesday, May 25, 2010

DIY Vertical Studio Fluorescent Lights for about $50

I researched around for bulbs to get, and found that some newer Fluorescent bulbs are pretty reasonable color accuracy and offer the best lumens/watt/$ of about any light source. After scouring the Internet for information, I didn't find much, but found that Home Depot had a selection of daylight balanced bulbs.

Why I haven't posted much for a week or more.

I wandered through their selection and found some CFL bulbs that were daylight balanced for $8.00 each, but that is fairly pricey given they are only 27 watts or so (and probably not as bright as an equivalent tube fluorescent with external ballast). I would probably need 6 or 8 of them to get the scene bright enough, and I would have to make a suitable fixture to hold the bulbs by wiring something up.

ERIC2788

Instead I wandered the fluorescent fixtures and found a Lithonia Lighting Shoplight for $10 ea, and they each take 2 T12 bulbs, which matched the Philips Natural Sunshine (5000k and 92 CRI, color rendering index) bulbs that they had for about $5 each (40 watts, 2200 lumens). The only other tube T8 bulbs that were near daylight or flash color temperature had to be purchased by the case. I was hoping for a fixture with a nice diffuser, but they were all in the $50+ price range (per fixture), and it turns out the fluorescent tubes are soft enough light without any diffuser.

The only trick was mounting the fixtures, they were designed for hanging so they aren't supposed to be flush mounted. I built a simple stand using some 1x4" pine I had left over from other projects, and hung the lamp at the top using a 30 lb picture frame hanger, and drilled a large hole in the middle right below the lamp to feed the power cord through and keep the lamp from swinging. Very simple to make, I was able to complete the project by my deadline (before the Season finale of Lost), and under my budget of $50. If I had to buy the wood it might have cost more like $60.

ERIC2789

The important thing with the base is to make it wide enough that the lamp doesn't tip over, and make sure the vertical is supported on at least one side by a sturdy bracket. I originally tried just the metal L bracket I had laying around, but it wasn't sturdy so I added the wood support as well.

ERIC2790

The hole keeps the lamp from swinging around and also keeps the cord out of the way.

ERIC2793

I have mine supported only by a picture frame hook. I wouldn't mind adding a sturdier bracket to support it, but build according to your needs. If you have a dog that might knock the thing over you might want to build the base a little larger and attach the light more securely (although my picture frame hook seems more than adequate).

Enjoy. This is useful for still life photographs, misc small objects, etc. I don't think the light color would be up to critical work, but does well enough for my test charts. I am not testing color though. Overall this is a nice setup that produces almost no heat. The lights do flicker a little, not enough to be very visible, but enough that it tricks the camera meter a little.

Eric

Sunday, May 23, 2010

A Sad Day

IMGP1657_28 mm_1-15 sec

I dropped my Schneider Kreuznach Curtagon 28mm f/4 on the cement a few days ago. I figured it was fine besides the filter threads, but not so. I ran a resolution test of it today and noticed that it was strongly decentered.

I love some of these older lenses like this as they aren't necessarily large aperture, but they are better corrected than many current lenses. This old Curtagon has virtually no distortion, and very little CA and is fairly sharp.

Whoops! Don't drop your lenses...

Notice the blue on the right side of the image? That is really soft, around 800 LW/PH or less. It looks like a ghosted image or something and basically covers the entire right half of the frame.

A sad day, at least I don't have much invested in the lens.

Eric

Tuesday, January 26, 2010

Last Breath

Photo 16 of 52:

Last Breath 16/52

I finally got around to taking another weekly shot. I got home and had to shovel the drive a bit before I could park my car. The temperature plummeted today and the wind was blowing. I loved the light in front of the car with the blowing snow so I thought why not lay down and look like I was dead ;)

So often I will get an urge like this to take a photo. Usually I don't, as I think something along the lines of looking like an idiot, being lazy and not wanting to get my tripod out, or I will make some other excuse, but tonight I decided to follow through.

The cell phone I added after doing 10 or so shots (I am sure the neighbors think I am nuts) as it draw attention to the shadows in the foreground. I didn't totally like this composition, but it had the main compositional elements I wanted. The others I was too close to the car, too far away, laying at a funny angle, etc. This one seemed the bet compromise. I cloned out the license plate on the car quickly with Lightroom.

And the view as I originally saw the light by itself:
IMGP2713

The reason I didn't use this with me lying in front, is I took up too much of the image and blocked the car significantly. It was a bit harder to see what was going on, but I still like the shot.

Eric